So, one of your power windows doesn’t work. Most of the time, such repairs are costly. However, with basic window regulator repair tools and access to a helpful manual or online blog, you can fix it entirely on your own. If, for one reason or another, you find it difficult to fix or replace your window regulator, be sure to address the situation to an expert, such as CGT Auto Glass Replacement.
Here are the steps you need to follow:
Step One: Remove the Switch Panel
Disconnect the electrical connectors after you pry out the switch panel, in order to begin working on your window regulator. After that, remove the door panel.
Step Two: Test the Motor Connector
Reconnect the switch panel and, after that, attach the voltmeter test leads to your vehicle’s moto connector. Once you’ve done that, toggle the window switch, and if it is good, replace the regulator.
Step Three: Remove the Window
Safely take out the window by removing the glass-to-regulator bolts. If needed, raise or lower the glass after cutting the mechanical cables. Tilt the window up and out and place it in a safe place.
Step Four: Replace the Regulator
Remove the fasteners that keep the regulator to the door and snake out the regulator through one of the holes in the door. Install your new regulator and re-assemble all the car door parts.
Here, you can also find a helpful toolkit list that you will need.
- A 4-in-1 Screwdriver
- A Cordless Drill
- A Socket/Ratchet Set
- And a Voltage Tester
You will also require a trim panel removal tool and some leather gloves for safety.
And there you have it. We hope this blog has helped you fix your car’s window regulator. If, however, you need a professional to handle the job, consider the window regulator repair services of our company in Houston, TX. You can reach our specialists at (281) 610-3542 and make an appointment right away. We look forward to hearing from you. Give us a call today!